User manual

Move the centrifugal weight rod (5) up and down ma-

nually and check the linkage mechanics of the blade

holders (6).

The rotor blades (7) must be easily adjustable without

any bearing play in the linkage mechanism or stiffness

orcatchinginanyspecicposition.

To allow the rotor blades of the main rotor (7) and the

tail rotor (8) to orient themselves at a 180° angle to each

other during operation, the blade retainer screws of the

main rotor (9) and the tail rotor (10) must not be tighte-

nedtoormly.

The rotor blades must still be easily movable in their hol-

ders but must not wobble.

Figure 10

Figure 11