Owner's manual

Safe-T-Reel Welding Cable Reels
Page 2
www.reelcraft.com
INSTALLATION INSTRUCTIONS
Inspection
Unpackandinspectreelfordamage.Turnthereelbyhandtocheckforsmoothoperation.Checkforcompleteness.
Figure 1
Figure 2
Mounting
Note: Ensurethatonlyaqualifiedelectricianinstalls/servicesthisequipment.
1. Four 1/2” diameter mounting holes are located at the base of the reel. Mount reel using four (customer supplied) bolts;
tightening them securely to ensure a solid, rigid attachment. (Figure 1)
Electrical
Note: ObserveanyapplicableNEC,OSHA,andlocalelectrialcodeswheninstallingthisequipment.
1. Attachacablelug(customersupplied)totheendoftheoutletcable.
2. Mountlugtocollectorringassemblyusingone1/2-13UNCbolt.(Figure2)