Product Manual

Reelcraft Industries, Inc. • (800) 444-3134 / (260) 248-8188 • Fax: (260) 248-2605
reelcraft@reelcraft.com • www.reelcraft.com
Form No: 1196-1106
Rev: 10/09
Dimensional Data
Four 7/16" diameter mounting holes
DP74XX DP76XX DP78XX
A 16 1/2” 16 1/2” 16 1/2”
B 17” 17” 17”
C 4” 4” 5”
D 8” 8” 9”
E 7” 7” 7”
"B"
"A"
Operating Instructions and
Parts List for
Series DP7000 OLP
Hose Reels
Read this manual carefully before
installing, operating or servicing this
equipment.
IMPORTANT
"E"
"C"
"D"
O 7/16
(4) PLACES
Safety
Personal injury and/or equipment damage may result if proper safety precautions are not observed.
Ensure that reel is properly installed before connecting input and output hoses.
Bleed fluid/gas pressure from system before servicing reel.
Before connecting reel to supply line, ensure that pressure does not exceed maximum working pressure rating of reel.
Remember, even low pressure is very dangerous and can cause personal injury or death.
Be aware of machinery and personnel in work area.
If a leak occurs in the hose or reel, remove system pressure immediately.
A high tension spring assembly is contained within the reel. Exercise extreme caution.
Pull hose from reel by grasping the hose itself, not the control valve.
If reel ceases to unwind or rewind, remove system pressure immediately. Do not pull or jerk on hose!
Treat and respect the hose reel as any other piece of machinery, observing all common safety practices.

Summary of content (4 pages)