Product Manual

ManualsBrandsReelcraft Manuals1/2in. Retractable Air Hose ReelsDual Pedestal Hose Reel — With 1/2in. x 50ft. PVC Hose, Max. 300 PSI

Reelcraft Industries, Inc. • (800) 444-3134 / (260) 248-8188 • Fax: (260) 248-2605

reelcraft@reelcraft.com • www.reelcraft.com

Form No: 1196-1106

Rev: 10/09

Dimensional Data

Four 7/16" diameter mounting holes

DP74XX DP76XX DP78XX

A 16 1/2” 16 1/2” 16 1/2”

B 17” 17” 17”

C 4” 4” 5”

D 8” 8” 9”

E 7” 7” 7”

"B"

"A"

Operating Instructions and

Parts List for

Series DP7000 OLP

Hose Reels

Read this manual carefully before

installing, operating or servicing this

equipment.

IMPORTANT

"E"

"C"

"D"

O 7/16

(4) PLACES

Safety

Personal injury and/or equipment damage may result if proper safety precautions are not observed.

• Ensure that reel is properly installed before connecting input and output hoses.

• Bleed fluid/gas pressure from system before servicing reel.

• Before connecting reel to supply line, ensure that pressure does not exceed maximum working pressure rating of reel.

• Remember, even low pressure is very dangerous and can cause personal injury or death.

• Be aware of machinery and personnel in work area.

• If a leak occurs in the hose or reel, remove system pressure immediately.

• A high tension spring assembly is contained within the reel. Exercise extreme caution.

• Pull hose from reel by grasping the hose itself, not the control valve.

• If reel ceases to unwind or rewind, remove system pressure immediately. Do not pull or jerk on hose!

• Treat and respect the hose reel as any other piece of machinery, observing all common safety practices.

Summary of content (4 pages)

PAGE 1
Operating Instructions and Parts List for Series DP7000 OLP Hose Reels IMPORTANT Read this manual carefully before installing, operating or servicing this equipment. Dimensional Data "A" O 7/16 (4) PLACES "C" "B" "E" "D" DP74XX DP76XX DP78XX A 16 1/2” 16 1/2” 16 1/2” B 17” 17” 17” C 4” 4” 5” D 8” 8” 9” E 7” 7” 7” Four 7/16" diameter mounting holes Safety Personal injury and/or equipment damage may result if proper safety precautions are not observed.
PAGE 2
Figure A Figure B Figure C Installation Instructions WARNING: Ensure that reel, hose, and equipment are properly grounded. Use an ohmmeter to check ground continuity. Mounting CAUTION: Unless reel was specified differently when ordering, maximum installation height is 16 feet. Do not exceed this distance. Maximum Operating Temperature: Low pressure (300 p.s.i.) = 150°F (66°C) Medium/High pressure (2000 p.s.i.) = 210°F (99°C) 1. 2. 3. Unpack and inspect reel for damage.
PAGE 3
Figure E Figure D Figure F Installing the Output Hose WARNING: Use extreme caution; reel under tension. Avoid releasing latch mechanism. CAUTION: Apply pipe thread sealant to all threads on standard reels. Do not overtighten connection. Recommended torque not to exceed 70 ft. lb. 1. 2. 3. 4. 5. 6. Manually turn sheave until spring is tight, back off 2 turns, then latch. Route output hose through roller bracket, U-bolts, then through cut out in spool as indicated in above illustrations.
PAGE 4
Parts Common to all Standard Reels ITEM NO. 1 3 4 5 6 8 9 10 11 ITEM NO. 2 7 12 16 19 20 4 PART NO. S2-52 S2-51 300006 602144 300107 261274 261275 262116 262110 NO. REQ’D. 8 4 1 1 4 1 1 1 2 DESCRIPTION Hex Cap Screw, 5/16-18 x 5/8” Long Hex Cap Screw, 5/16-18 x 1/2” Long Set Screw, 3/8-16 x 1/2” Long Latch Pawl Assembly Hex Lock Nut, 5/16-18 Spring Arbor Arbor Key Hub B Guide Arm ITEM NO. 13 14 15 17 18 21 22 23 PART NO. 300007 260031 262115 262138 602149 S76-106 300121 300011 NO.