Full Product Manual

9
Enabling/Disabling Audible Beep
1. Press the OK button when the audible beep icon
OK
MENU
ZERO
is selected in
Setup Mode.
2. Use the
OK
MENU
ZERO
and
OK
MENU
ZERO
arrows to select between ON
OK
MENU
ZERO
or OFF
OK
MENU
ZERO
X.
3. Press the OK button to conrm selection.
4. Press the
OK
MENU
ZERO
button to exit Setup Mode and resume normal operation.
Setting the LCD Brightness
1. Press the OK button when the brightness icon
OK
MENU
ZERO
is selected in
Setup Mode.
2. Use the
OK
MENU
ZERO
and
OK
MENU
ZERO
arrows to increase or decrease the brightness level.
3. Press the OK button to conrm selection.
4. Press the
OK
MENU
ZERO
button to exit Setup Mode and resume normal operation.
Selecting the Thickness Unit of Measure
1. Press the OK button when the unit of measure icon um/mil is selected
in Setup Mode.
2. Use the
OK
MENU
ZERO
and
OK
MENU
ZERO
arrows to select between μm and mil.
3. Press the OK button to conrm selection.
4. Press the
OK
MENU
ZERO
button to exit Setup Mode and resume normal operation.
Selecting Calibration Mode
1. Press the OK button when the calibration mode icon
OK
MENU
ZERO
is selected
in Setup Mode.
2. Use the
OK
MENU
ZERO
and
OK
MENU
ZERO
arrows to select between zero and
2-point calibration.
3. Press the OK button to conrm selection.
4. Press the
OK
MENU
ZERO
button to exit Setup mode and resume normal operation.
continued...
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]