Full Product Manual

ManualsBrandsREED Instruments ManualsSafety EquipmentCoating Thickness Gauge

Single-Point Decision Configuration

1. Press the

ZERO

and

ZERO

arrows to set the target thickness value, and

press the

ZERO

button to conrm selection.

2. Press the

ZERO

and

ZERO

arrows to set the tolerance value, and press the

ZERO

button to conrm.

Use the gauge to measure the coating thickness of the measured object.

4. The screen displays the measured value and whether or not the

thicknesspassesorfails("PASS"or"FAIL").

5. Press the

ZERO

button to return to the single-point analyzing setup

screen or hold the

ZERO

button to exit and resume normal operation.

Multi-Point Decision Configuration

1. Press the

ZERO

and

ZERO

arrows to set the target thickness value, and

press the

ZERO

button to conrm selection.

2. Press the

ZERO

and

ZERO

arrows to set the tolerance value, and press

the

ZERO

button to conrm.

Use the gauge to measure the coating thickness of the measured object.

After measuring the same position 3 times, the gauge will automatically

display the average value of all 3 measurements under point A.

4. Change measurement position. After measuring the same position 3

times, the gauge will automatically display the average value of all 3

measurements under point B.

5. Proceed by measuring positions C, D, and E the same way as

positions A & B.

6. After the measurements are complete, the screen displays the average

value of all 5 points and whether or not the thickness passes or fails

("PASS"or"FAIL").

7. Press the

ZERO

button to return to the multi-point-point analyzing setup

screen or press and hold the

ZERO

button to exit and resume

normal operation.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com