Full Product Manual

3
Introduction
Thank you for purchasing your REED R7100 Photo-Contact Tachom-
eter. Please read the following instructions carefully before using your
instrument. By following the steps outlined in this manual your meter will
provide years of reliable service.
Product Quality
This product has been manufactured in an ISO9001 facility and has been
calibrated during the manufacturing process to meet stated product
specications. If a certicate of calibration is required please contact the
nearest authorized REED distributor or authorized Service Center. Please
note an additional fee for this service will apply.
Safety
Never attempt to repair or modify your instrument. Dismantling your
product, other than for the purpose of replacing batteries, may cause
damage that will not be covered under the manufacturer’s warranty.
Servicing should only be provided by an authorized service center .
Features
• Dual function unit with both contact and non-contact capabilities
• Provides fast and accurate RPM (revolutions per min) measurements of
rotating objects and surface speed measurements m/min (meters per
min) with included contact adapters
• Built-in laser pointer identies target area
• Internal memory recalls maximum, minimum values as well as last
value stored
• Large LCD display and low battery indicator
REED Instruments
1-877-849-2127 | [e-mail] | www.reedinstruments.com