Full Product Manual

9
Setting the Combination Lock
The default combination on the included lock is 0-0-0. In order to change
the code follow these steps:
1. Set the lock combination to 0-0-0 and press the release to open
the lock.*
2. Using a pointed object, press and hold the locking pin on the bottom
side of the lock.
3. Set the new combination code and release the locking pin.
*Please ensure the code is being entered on the side with the alignment
bar marks on the combination lock.
FAQ's
Once I've setup my R6030 how do I start recording?
The R6030 will begin recording once the software setup is completed.
There is no button to begin recording.
How do I stop recording?
Unfortunately there is no way to stop recording in the eld. In order to
stop recording the R6030 needs to be connected to your PC.
Is the R6030 compatible with my Apple (MAC) computer or tablet?
At this time the R6030 is only compatible with PC computers.
I cannot install my software on my work computer, do you know why?
Please note that you will require administrative rights to install and run the
R6030 software. In order to install and run the software you will have to
contact your IT department/personnel.
Can I use my R6030 without the software?
In order to setup the instrument and retrieve data the R6030 software
is required.
REED Instruments
1-877-849-2127 | [e-mail] | www.reedinstruments.com