R6030 Temperature & Humidity Datalogger Instruction Manual REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.
Table of Contents Introduction................................................................................................. 2 Product Quality............................................................................................ 3 Safety.......................................................................................................... 3 Features....................................................................................................... 3 Included...................................
Product Quality This product has been manufactured in an ISO9001 facility and has been calibrated during the manufacturing process to meet stated product specifications. If a certificate of calibration is required please contact the nearest authorized REED distributor or authorized Service Center. Please note an additional fee for this service will apply. Safety Never attempt to repair or modify your instrument.
Specifications Temperature Measuring Range: Accuracy: Resolution: Humidity Measuring Range: Accuracy: -40 to 158°F (-40 to 70°C) ±1.8°F (1.0°C) 0.1°F/°C Resolution: General Specifications Display: Min: Max: Settable Alarms: Sampling Rate: Internal Memory: 0 to 100% RH 0 to 20% & 80 to 100%: ±5% 20 to 40% & 60 to 80%: ±3.5% 40 to 60%: ±3% 0.1% RH Dual Display, LCD Yes Yes Yes (temp. and RH) Yes (2 secs to 24 hours) 32k readings (16,000 temp.
Instrument Description R6030 2 3 Temperature & Humidity Datalogger 4 5 Temp.: -40 to 70°C -40 to 158°F Humidity: 0 to 100%RH 6 7 1. 2. 3. 4. Data Logging LED Alarm LED LCD Display Temperature & Humidity Toggle Button 5. MAX/MIN Value Button 6. Temperature & Humidity Sensors 7. USB Port (Bottom) REED Instruments 5 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.
Display Description 1 4 2 5 6 3 7 1. 2. 3. 4. Low Battery Indicator MAX/MIN Indicators Record Mode Active Date & Time (10 sec rotation) 5. Relative Humidity 6. Memory Full 7. Temperature Unit of Mesure Supplemental Display Notes 1. Press the MAX/MIN button to view the recorded Max and Min values with the time they were recorded. The LCD will return to real-time display if no button is pressed for 40 seconds. 2. The Time and Date display will automatically toggle every 10 seconds. 3.
Operating Instructions Software Installation Install the included software by placing the supplied program disc in the PC's CD-ROM drive. If the installation program does not automatically start, open and browse the CD-ROM drive from your computer. Double click on the setup file and follow the on-screen prompts to install the software. If your computer does not have a CD drive please visit www.reedinstruments.com/software to download the latest R6030 software.
6. If you have specific questions related to your application and/or questions related to software setup and functionality please contact the nearest authorized distributor or Customer Service at info@reedinstruments.com or 1-877-849-2127. Supplemental Operation Notes 1. 2. 3. 4. 5. 6. 7. 8. The R6030 will automatically begin recording once setup is complete and the datalogger is removed from the PC. The R6030 needs to be reset from the software in order to start a new data logging session.
Setting the Combination Lock The default combination on the included lock is 0-0-0. In order to change the code follow these steps: Set the lock combination to 0-0-0 and press the release to open the lock.* 2. Using a pointed object, press and hold the locking pin on the bottom side of the lock. 3. Set the new combination code and release the locking pin. *Please ensure the code is being entered on the side with the alignment bar marks on the combination lock. 1.
Product Care To keep your instrument in good working order we recommend the following: • Store your product in a clean, dry place. • Change the battery as needed. • If your instrument isn't being used for a period of one month or longer please remove the battery. • Clean your product and accessories with biodegradable cleaner. Do not spray the cleaner directly on the instrument. Use on external parts only.
Product Support If you have any questions on your product, please contact your authorized REED distributor or REED Instruments Customer Service by phone at 1-877-849-2127 or by email at info@reedinstruments.com. Please visit www.REEDINSTRUMENTS.com for the most up-to-date manuals, datasheets, product guides and software. Product specifications subject to change without notice. All rights reserved.
TEST & MEASURE WITH CONFIDENCE CHECK OUT OUR LATEST PRODUCTS! REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.
