Full Product Manual

Setting up or Downloading Data
1. Once the software and battery have been installed, insert the R6020
in an available USB port on your PC.
2. Double click the software icon on your desktop to load the program.
3. In the bottom left corner of the software window there is a status
indicator that should show your R6020 is connected "Connect".
If you do not see "Connect" please verify your battery has been
correctly installed.
3. Set up the data logger for a new session, or download saved data
from a previous recording.
4. When setup is complete or data has been downloaded, the R6020
should be removed from the USB port in order to preserve battery life.
5. Full specications and Operating System compatibility can be found
on the product page at www.reedinstruments.com.
6. If you have specic questions related to your application and/or
questions related to software setup and functionality please contact
the nearest authorized distributor or Customer Service at
[e-mail] or 1-877-849-2127.
LED Status Guide
continued...
R6020
DATA LOGGER
2 3 4
REED Instruments
1-877-849-2127 | [e-mail] | www.reedinstruments.com