Full Product Manual

Instrument Description
1. Protective Cover
2. USB Connector
3. Start Button
4. RH & Temperature Sensors
5. Mounting Clip
6. Record LED (Green)
7. Alarm LED (Red/Yellow)
Operating Instructions
Software Installation
Install the included software by placing the supplied program disc in the
PC's CD-ROM drive. If the installation program does not automatically start,
open and browse the CD-ROM drive from your computer. Double click on
the setup le and follow the on-screen prompts to install the software.
If your computer does not have a CD drive please visit
www.reedinstruments.com/software to download the latest R6020 software.
Battery Installation or Battery Replacement
A 3.6V battery is provided with the R6020. Please note that only a 3.6V
battery should be used with the instrument. In order to install the battery
follow the steps below:
1. Use a small athead screwdriver to open the casing
2. Slide the casing off to expose the battery
3. Install (or replace) the battery
4. Slide the casing back on the instrument
continued...
2
3
4
5
6
7
R6020
DATA LOGGER
REED Instruments
1-877-849-2127 | [e-mail] | www.reedinstruments.com