Full Product Manual

7
7. To change the WET alarm value, press the UP or DOWN buttons.
8. Press the SET button to save the WET alarm value and to return to
data hold mode.
9. IfthemoisturemeasurementexceedsthesetRISKalarmsetting,the
meterwillbeepeverysecond.Ifthemoisturemeasurementexceeds
the set WET alarm setting, the meter will beep every half second.
10. Press the MEASbuttontoexitdataholdmodeandresume
normal operation.
Backlighting
Press the UP/ button to turn backlighting on and off.
Moisture Comparison Table
Construction Material Display (Unit) Moisture Status
Gypsum
<30 DRY
30-60 RISK
>60 WET
Cement
<25 DRY
25-50 RISK
>50 WET
Wood
<50 DRY
50-80 RISK
>80 WET
REED Instruments
1-877-849-2127 | [e-mail] | www.reedinstruments.com