Installation Guide

5
Display Description
Data Hold Indicator
Relative Indicator
Humidity Measurement
Temperature Display
Unit Indicator
Minimum Indicator
Maximum Indicator
Low Battery Indicator
Auto Power Off Indicator
Indication de la fonction de
conservation de la lecture
Indication de l'unité de mesure
Indication de la valeur de lecture minimum
Indication de pile faible
Indication du mode d'arrêt automatique
Indication de la valeur de lecture maximum
Indication du mode de relativisation
Mesure d'humidit
é
Operating Instructions
PresstheON/OFFbuttontoturnthemeterONorOFF.
Unit of Measure Selection (Temperature)
When the meter is powered on press the °C/°F button to toggle between
Celsius and Fahrenheit.
Note:ThedefaultunitofmeasureisCelsius(°C).Themeterwill
automatically save the last selected unit of measure when turned off.
Data Hold
Press the HOLD button to freeze the current reading on the display. Press
the button again to resume normal operation.
Note: When the Data Hold function is enabled the
REL, MAX/MIN, and
°C/°F buttons are disabled.
Relative Function
Press the REL button to store the current measurement. The meter will
display the difference between any new measurement and the stored
measurement. Press the
RELbuttonagaintoexitRelativeFunction
mode and resume normal operation.
continued...
REED Instruments
1-877-849-2127 | [e-mail] | www.reedinstruments.com