Full Product Manual

reedinstruments
w ww
c om
6
Phase Indication Table
Non-contact Rotary Field Indication
1. Disconnect all test leads from the unit.
2. Position the unit on the motor so that it is parallel to the length
of the motor shaft. The unit should be one inch or closer to the
motor, and the bottom of the unit should be oriented towards the
drive shaft. See Figure 1.
3. Press the ON/OFF button. The green ON indicator shows that the
instrument is ready for testing.
4. Either the Clockwise or Counter Clockwise Rotary indicator will
illuminate showing the type of rotary eld direction present.
Note: The indicator will not operate with engines controlled by frequency
converters.
(Figure 1) Motor Rotation
REED Instruments
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com