Full Product Manual

reedinstruments
w ww
c om
3
Safety
• Protective equipment must be used to prevent shock and injury
• Use of this instrument in a manner not specied by the manufacturer
may impair safety features/protection provided by the equipment
• Avoid working alone
• Damaged leads must be replaced
• Do not use this unit if it looks damaged
• Be careful when working above 30V AC RMS, 42V AC Peak, and 60V
DC as such voltages pose a shock hazard
• Do not touch the probe contacts when in use, keep ngers behind
the probe nger guards
• Measurements can be adversely affected by impedances of
additional operating circuits connected in parallel or by transient
currents
• Verify operation prior to measuring hazardous voltages
(voltages above 30V AC RMS, 42V AC Peak and 60V DC)
• Do not operate with any of the parts removed
• Do not operate around explosive gas, vapour, or dust
• Do not operate in a wet environment
Features
• Non-contact detection of three-phase rotary eld systems
• Determines motor-rotation direction and connection
• Magnetic eld detection
Specifications
Operating temperature: 0 to 40°C
Operating humidity: 15 to 80%
Operating altitude: 2000m
Pollution degree: 2
REED Instruments
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com