Full Product Manual

Setup Mode
1. Press and hold the SET button for 2 seconds to enter Setup Mode.
2. Press the SET button continuously to scroll through the
following parameters.
Parameter Description
Sd F Format the SD memory card
dAtE Set the time and date
SP-t Set the data logging sampling rate
PoFF Enable or disable the auto-power off function
bEEP Turn the beeper on or off
dEC Set the decimal format (USA (20.00) or European (20,00))
t-CF Select the temperature unit of measure (°C or °F)
PEr C Set Conductivity temperature compensation factor
ESC Exit Setup mode
3. Once the appropriate parameter has been selected, follow the
instructions below.
Formatting the SD Card (Sd F)
Follow steps 1 through 4 when "Sd F" appears on the LCD.
1. Press the
and buttons to select "YES" to format the card. Select
"NO" to abort.
2. Press the ENTER button to conrm selection.
3. Press the ENTER button again to re-conrm.
4. The meter will format the SD card and automatically return to the
Setup menu when formatting is complete.
continued...
REED Instruments
1-877-849-2127 | [e-mail] | www.reedinstruments.com