Full Product Manual

Operating Instructions
Power ON and OFF
1. Gently pull the trigger to turn the thermometer on. The LCD
display and white backlight will turn on.
2. The thermometer will automatically shut off after 8 seconds
of inactivity.
Manual Measurement
1. Pull and hold the trigger after aiming at the target. The icon
will ash, indicating that the target temperature is being measured.
2. When the trigger is released, the icon will disappear and the
icon will appear indicating that measurement has stopped
and the last measured temperature will remain on-screen until
another measurement is taken or the unit turns off.
Continuous Temperature Measurement (Trigger Lock)
1. Once the trigger lock function is enabled (see page 12), the icon
will appear on the display and the icon will ash when the
trigger is pressed. The thermometer will continuously measure
temperature and the backlight will auto shut off after 2 minutes.
2. Pull the trigger again to stop measuring and the and icons
will disappear and the icon will appear. The thermometer will
keep the last measured value until the unit turns off.
continued...
REED Instruments
1-877-849-2127 | [e-mail] | www.reedinstruments.com