Full Product Manual

Battery Replacement
1. The battery should be replaced when is displayed.
2. Remove the screw with a at screwdriver and open the battery cover.
3. Replace the 9V battery.
4. Place the battery cover back and tighten the screw.
Applications
• Verify mechanical (bearings, motors) or electrical
(circuit breaker boxes) equipment
• Calibration and control of heater and oven temperatures
• Monitoring materials in processes involving heating and/or cooling
• Quality control monitoring
• Research and development applications
• Automotive diagnostics
• Conduct HVAC energy audits
REED Instruments
1-877-849-2127 | [e-mail] | www.reedinstruments.com