Full Product Manual

Switching the Unit of Measure (°F/°C)
Press the SET button four times to enter unit of measure setup. Use the UP
and DOWN buttons to switch between °F and °C units. The thermometer
will exit the setup after 5 seconds of inactivity.
Turning Laser ON/OFF
To turn the laser on or off, press the SET button ve times to enter laser
setup. Use the UP and DOWN buttons to turn the laser on or off. The
thermometer will exit the setup after 5 seconds of inactivity.
Trigger Lock Setup
To turn the lock measurement on or off, press the SET button six times to
enter lock measurement setup. Use the UP and DOWN buttons to feature
on or off. The thermometer will exit the setup after 5 seconds of inactivity.
continued...
REED Instruments
1-877-849-2127 | [e-mail] | www.reedinstruments.com