R2310 Infrared Thermometer Instruction Manual REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.
Table of Contents Introduction.................................................................................................... 3 Product Quality............................................................................................... 3 Safety............................................................................................................. 3 Features.......................................................................................................... 4 Included.......................
Introduction Thank you for purchasing your REED R2310 Infrared Thermometer. Please read the following instructions carefully before using your instrument. By following the steps outlined in this manual your meter will provide years of reliable service. Product Quality This product has been manufactured in an ISO9001 facility and has been calibrated during the manufacturing process to meet stated product specifications.
Features • • • • • • • • • • Built-in laser pointer identifies target area User selectable °F or °C 12:1 distance to spot size ratio Digitally adjustable emissivity Max, Min, Average and Differential readings Backlit display High and low alarms Dustproof and Drop tested Trigger lock for continuous monitoring Low battery indication and auto shut off Included • Carrying Case • Battery Specifications Temperature Range: Accuracy: Resolution: Optical Resolution (D:S): Spectral Response: Emissivity: Response
Alarm Indicators: Max/Min: Average and Differential: F/C Switchable: Trigger Lock: Tripod Mountable: Drop Tested: Laser Type: Low Battery Indicator: Power Supply: Battery Life: Product Certifications: Operating Temperature: Storage Temperature: Operating Humidity Range: Maximum Operating Altitude: Maximum Storage Altitude: Dimensions: Weight: LED (High: Red, Low: Blue) Yes Yes Yes Yes Yes Yes, 9.8' (3M) Class II Yes 9V battery Approx.
Instrument Description 4 1 2 5 6 7 3 8 9 10 11 12 1. 2. 3. 4. 5. 6. Laser Pointer Beam IR Sensor Trigger High/Low Alarm Indicators LCD Display Mode Button/Down Arrow 7. Set Button 8. High/Low Alarm Button/ Up Arrow 9. Handle Grip 10. Battery Cover 11. Battery Compartment Screw 12. Tripod Mount REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.
Display Description Temperature Measurement Trigger Lock Laser ON High and Low Limit Alarm Low Battery Temperature Measurement Active Measurement Data Hold Unit of Measurement Temperature Measurement Value Mode Emissivity Temperature Measurement Value from Selected Mode REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.
Distance & Spot Size REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.
Operating Instructions Power ON and OFF 1. 2. Gently pull the trigger to turn the thermometer on. The LCD display and white backlight will turn on. The thermometer will automatically shut off after 8 seconds of inactivity. Manual Measurement 1. 2. Pull and hold the trigger after aiming at the target. The icon will flash, indicating that the target temperature is being measured.
Maximum, Minimum, Average and Differential Functions Press the MODE button to toggle between MAX/MIN/AVG/DIF modes. The temperature value of corresponding modes are shown in the secondary display area. Setting the High Temperature Alarm Press the SET button once to enter the high alarm limit setup. Use the UP and DOWN buttons to set temperature value. Press the UP and DOWN buttons to add or subtract 1. Hold the UP or DOWN buttons to add or subtract 10 temperature values.
Setting the Low Temperature Alarm Press the SET button twice to enter the low alarm limit setup. Use the UP and DOWN buttons to set values. Press the UP and DOWN buttons to add or subtract 1 temperature value. Hold the UP or DOWN buttons to add or subtract 10 temperature values. The instrument will exit the setup after 5 seconds of inactivity. Adjusting Emissivity The instrument's emissivity can be adjusted from 0.01 to 1.0. Press the SET button three times to enter the emissivity setup.
Switching the Unit of Measure (°F/°C) Press the SET button four times to enter unit of measure setup. Use the UP and DOWN buttons to switch between °F and °C units. The thermometer will exit the setup after 5 seconds of inactivity. Turning Laser ON/OFF To turn the laser on or off, press the SET button five times to enter laser setup. Use the UP and DOWN buttons to turn the laser on or off. The thermometer will exit the setup after 5 seconds of inactivity.
Turning High and Low Alarms ON/OFF Press the button to enter alarm setup screen. Press the button again to toggle through the alarm functions. 1. 2. 3. 4. High/Low alarms on. High alarm on. Low alarm on. No alarm set. 1 2 3 4 REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.
Battery Replacement 1. 2. 3. 4. The battery should be replaced when is displayed. Remove the screw with a flat screwdriver and open the battery cover. Replace the 9V battery. Place the battery cover back and tighten the screw.
Appendix: Emissivity Chart Emissivity is a term used to describe the energy-emitting characteristics of materials. Most (90% of typical applications) organic materials and painted or oxidized surfaces have an emissivity of 0.95. Inaccurate readings will result from measuring shiny or polished metal surfaces. To compensate, cover the surface to be measured with masking tape or flat black paint. Allow time for the tape to reach the same temperature as the material underneath it.
Measured Surfaces Emissivity Steel: Cold Rolling, Steel PlateBurnishing, Steel Plate Rubbing 0.7-0.9, 0.4-0.6, 0.1 Zinc: Oxidization 0.1 Non-Metal Asbestos 0.95 Asphalt 0.95 Basalt 0.7 Carbon: Non-Oxidization, Graphite, Silicone Carbide 0.8-0.9, 0.7-0.8, 0.9 Ceramics 0.95 Clay 0.95 Concrete 0.95 Cloth 0.9 Glass: Convex, Smooth, Lead-Boron 0.76-0.8, 0.92-0.94, 0.78-0.82 Plates 0.96 Stone Products 0.93 Plaster 0.8-0.95 Ice 0.98 Limestone 0.98 Paper 0.95 Plastics 0.
Product Care To keep your instrument in good working order we recommend the following: • Store your product in a clean, dry place. • Change the battery as needed. • If your instrument isn’t being used for a period of one month or longer please remove the battery. • Clean your product and accessories with biodegradable cleaner. Do not spray the cleaner directly on the instrument. Use on external parts only.
Product Support If you have any questions on your product, please contact your authorized REED distributor or REED Instruments Customer Service by phone at 1-877-849-2127 or by email at info@reedinstruments.com. Please visit www.REEDINSTRUMENTS.com for the most up-to-date manuals, datasheets, product guides and software. Product specifications subject to change without notice. All rights reserved.
TEST & MEASURE WITH CONFIDENCE REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.
RATURE TEMPE IDITY M U &H SOUND RE MOISTU Y OCIT AIR VEL ICAL ELECTR REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.
