Full Product Manual

6
Operating Instructions
1. Turn the instrument on or off by pressing the POWER button.
2. Press the Lux/Ft-cd button to toggle between Lux and Foot Candles
units of measurement.
3. When selected, face the Light Sensor under the light source.
4. When the readings are stable, note the measured value.
Data Hold
1. While taking a measurement, press the HOLD button to freeze the
current readings on the display.
2. While in this mode a "HOLD" symbol will appear on the LCD.
3. Press the button again to resume normal operation.
Recording Maximum and Minimum Readings
1. Press the MAX/MIN button to enter recording mode as indicated by
"REC" on the LCD. The meter will now begin recording maximum
and minimum readings.
2. While in recording mode;
A) Press the MAX/MIN button once and the maximum value will
appear on the display as indicated by "REC MAX" and will
automatically update when new maximum data value is measured.
B) Press the MAX/MIN button again and the minimum value will
appear on the display as indicated by "REC MIN" and will
automatically update when new minimum data value is measured.
C) To exit recording mode and resume normal operation, press and
hold the MAX/MIN button for two seconds.
Note: When in recording mode the POWER button is disabled and the
meter cannot be turned off.
Auto Power Off
To preserve battery life, the meter is programmed to turn off after
10 minutes of inactivity.
REED Instruments
1-877-849-2127 | [e-mail] | www.reedinstruments.com