Phau Ntawv Qhia

Please read me before installation
Q8: There is no suitable socket in the fuse box.
A8: If there is no connector on the kit that matches your fuse box.
You can cut the fuse plug on the cable, then unplug the cable and wrap
the cable around the original fuse plug on the car. Just like in the
picture. This installation is also very safe and will not affect the use,
please rest assured.
If the you does not want to feel unsafe, we can also provide an
upgraded version of the Double-4 fuses Hardwire Kit.
Q9: Can an OBD power plug adapter be used instead of the hardwire
kit?
A9: No, OBD is connected to the on-board computer diagnostic device,
generally do not occupy it casually. It is recommended that he use a
buck line.
Q10: dash cam is hot.
A10: Because our dashcam does not have a built-in battery, it is
normal to heat up during operation and will not affect the use of the
machine. If there is a heat that causes black dots on the screen or
repeated switching on and off, replace the host for the customer.
Q12: "Mass Storage" appears.
A12: Because a USB cable with data transfer mode is used to connect
the camera and an external power source. The camera enters the
data transfer mode, which can only be used to transfer data and
cannot do any other operations.
It is recommended to use original car charger and USB cable without
data transfer mode.
Q11: Why dash cam only has 1/3/5 minutes to choose? Can't record for
a long time?
A11: This is because the dash cam has a loop recording function. When
the memory card is full, it will automatically delete the first recorded
content to provide storage space for new videos, which can solve the
problem of insufficient storage space. If the recording time is too long,
the number of stored videos will be very small and will be overwritten
soon. This may result in the loss of important video.