User Manual

1. LOOPS OUT: use this socket to connect the loop sample output

to a spare channel on your mixing desk.

2. 6VDC POWER: use this socket to connect the supplied power

adapter for AC operation or battery charging.

3. INPUT: use this socket to connect the audio signal from your

mixing desk (headphone monitor feed is recommended)

If you want to quickly try out the performance of ,

please first read the following points carefully:

CONNECTIONS: Before making any connections, make sure that

the power on all your equipment is turned OFF. Connect the audio

and MIDI cables for a basic system setup as shown on page 6.

TURNING ON THE POWER: Make sure all connections have been

made correctly and that the volume controls on the mixing desk and

amplifier system are completely turned down. Connect the power

supply (included) to the ‘power in’ socket on the rear panel of

and plug it into a suitable AC outlet, then

the [BPM ON/OFF] button for 2 seconds. Next, turn ON the

power of the mixing desk then the power to the amplifier system.

SETTING UP: Select a suitable audio track (dance orientated

music with defined beat information), start the playback on the

SoundBITE micro

SoundBITE micro press &

hold

Rear Panel

Controls & Connections

12 3

Quick Start Guide