User Manual

4. ERASE ALL (STOP/RESET): in [LOOP] mode, use this button to

instantly erase all the recorded loops. In [MIDI] mode, use this

button to stop/reset the MIDI clock output.

5. LOOPS: use these four buttons to record, playback and mute the

four loop samples.

6. RE-SAMPLE: in [LOOP] mode, use this button to re-sample

(over-record) any pre-recorded loops. In [MIDI] mode, use this

button to run/pause the MIDI clock output.

7. INDICATOR: this tri-colour led indicates various operational

conditions such as BPM engine lock, battery condition etc.

1. MIDI IN: use this socket to merge your other MIDI output signals

with the SoundBITE micro’s own MIDI clock (only use the special

Red Sound MIDI adaptor cable supplied!).

2. MIDI OUT: use this socket to send the MIDI clock/merged signal

to your MIDI sequencer (only use the special Red Sound MIDI

adaptor cable supplied!).

3. HEADPHONES: use this socket to connect your headphones.

4. MODE: use this switch to select [MIDI] or [LOOP] control modes.

Controls & Connections

Front Panel

12 3 4