User Manual

Other Loop Edit Features
Operation
17
To re-sample (or record) a loop, simply press the desired [LOOP]
button once (whether it is pre-recorded or empty). The tri-colour
indicator and loop button indicator will flash a count-down of the
number of beats in the loop whilst the sample is recording, as with
normal record mode. When the recording process is complete, re-
sample mode is automatically cancelled.
These additional features allow you to control the output level of the
loop samples and vary the synchronisation of the loops in relation to
the incoming audio.
LOOP SYNC ADJUSTMENTS - ALL LOOPS: You can adjust the
synchronisation point of ALL recorded loops simultaneously. This
may be necessary if the BPM engine loses audio beat information
during a track and the loop starts to drift-out of synchronisation, or
you may wish to creatively move the relative position of loops (try
moving the loops half a beat compared to the input audio to achieve
a new syncopated rhythm).
To make an adjustment simply press the [PULL] or [PUSH] buttons
during normal loop playback to adjust the overall loop
synchronisation setting.
LOOP OUTPUT LEVEL: Once a loop has been recorded you can
adjust its output level if required e.g. the Auto Gain Control may
boost quieter passages and so this feature lets you trim the level to
suit.
To boost/cut the output level of a loop, first press and hold down the
[LOOP] button when it is in [PLAY] mode (indicator ON).
RANGE = -20dB to +6dB