Redsail Laser RS3040A Mini Laser Engraving Machine User Manual Redsail Tech Co., Ltd http://www.hflaser.
Redsail Laser ☆ Thank you very much for buying RS3040A laser engraving machine. ☆ In order to make sure that your laser engraving machine can work steadily for a long period of time, please read this manual carefully, be familiar with and master the operation method and technological requirements of the machine in advance. ☆ If abnormal situation takes place, please turn off the power immediately and consult this manual.
Redsail Laser Contents 1. Function of RS3040A laser engraving machine 2. Installation of RS3040A laser engraving machine 3. Structure and adjusting method of ray path 4. Basic operation procedure 5. Safety cautions and maintenance 6. Problems and solutions 7. Regulations of repair guarantee Redsail Tech Co., Ltd http://www.hflaser.
Redsail Laser I function of laser engraving machine The application scope of laser engraving machine is very wide. Different designs have been used in machines of our company to meet the needs of all use. We believe that the type of machine you have chosen will surely be of great help to your work. The following introductions might provide you information for enlarging the scope of usage and to use laser machine well. 1.
Redsail Laser 3. Installation 1) Install the EASYCUT 2.0 and insert the Dongle (USB key) to run the software. Dongle (USB KEY) 2) Connect the data cable (232 port) with the computer. 3) Fill the water tank with pure water, place the water pump (aquarium) inside the water, feel the water outlet and connect left one of the tubes with water pump. (There are two pipes at the back of the RS3040A, they connect with laser tube to supply water cooling), 10-20 seconds later, water comes out from right tube.
Redsail Laser Water input left pipe and come out at right pipe. 4) Connect the earth wire and grounding the machine shell for safety. 5) Connect the blower fan with power supply and place it at right position, and then start the machine. 6) Test the laser and adjust the mirror as following steps: III Structure and adjusting method of ray path 1. Structure of the ray path Redsail Tech Co., Ltd http://www.hflaser.
Redsail Laser 1. Laser tube 2. The 1st reflect mirror 4. The 3rd reflecting mirror 5.The 4th 3. The 2nd reflecting mirror reflecting mirror 6. Focus lens 7. Working platform up and down control screw 2. Structure of the optical components Ray path is ray guide system. RS3040A has adopted flying-optical system. The complete system is made up of laser tube; four reflect mirrors; focus lens and relevant adjusting devices. These are the main parts of the machine.
Redsail Laser Focus length: 62mm (from the surface of processed material to the up surface of the diamond board, it is marked with a red arrow in this figure) 3.
Redsail Laser 1st reflect mirror 2nd reflect mirror 3rd reflect mirror 4th reflect mirror Adjust the work plate BECAREFUL OF THE LASER BEAN WHEN ADJUSTING. ESPECIALLY NEVER LET THE LASER GOES INTO YOUR EYES!! Redsail Tech Co., Ltd http://www.hflaser.
Redsail Laser IV Basic operation procedure 1. Starting up 1) Start the water pump; let the water in laser tube circulate for 3 minutes. 2) Turn on the power of machine. 3) Turn on the power of blower fan. 4) Turn on the laser power, and press “test” button to see if there is ray. 5) Use the arrow key to move the laser head, make sure that it can be moved. 6) Adjust the work plate, and fix up the focus length. 7) Operate the Easycut 2.0 in the computer to start work. 2.
Redsail Laser ESD. 7) Blower fan must be turned on while working, so as to avoid pollutions on mirrors and lens. It is forbidden to put any flammable and explosive articles close to the equipment so as to avoid fire. 8) Any irrelevant total reflection or diffuse reflection objects can not be placed in the equipment to prevent the laser from reflecting on human body or flammable articles directly. 9) The water in laser tube should be drawn off in winter, in order to avoid ice cracking of the tube.
Redsail Laser 2) Water temperature should be examined at all times during the working process. Once the water turns to be warm, please change it right away (the right way of changing the water is to get out of some hot water and fill in cold water). 3) If there is any particular requirements, the Current shouldn't be no more than 20MA, thus to avoid the tube becoming aged quickly. 4) Water tank, water pump and water inlet rubber tube should be cleaned once every week.
Redsail Laser VI Problems and Solutions Problem No rays The object can not be full cut The effect isn’t clear Cause Solution Laser power supply is broken Replace it with a new power supply Reflect mirror or focus lens is broken Replace it with a new one Laser tube is broken Replace it with a new one Main board is broken Replace it with a new one Focus lens is polluted Clean the lens Reflecting mirror is polluted Clean the mirror Ray path is not right Adjust the path Laser tube is old R
Redsail Laser 4. It is very important to keep the serial number of the product given by the manufacturer when the product leaves factory. Only when information contained in it has been confirmed, can customers enjoy after-sale service provided by our company. 5. The manufacturer has the right to modify specifications of the product without notification to customers in advance. 6.