User manual

ManualsBrandsRedsail ManualsBusiness equipmentCutting Plotter

2009-05-19

Blades 45 degrees package of 1 or 5 blades

Blades 60 degrees package of 1 or 5 blades

Cutter strip Model 360C (12”)

Cutter strip Model 450C (15”)

Cutter strip Model 720C (24”)

Cutter strip Model 800C (30”)

Cutter strip Model 1360C (48”)

14-1/4” or 360mm

17-1/2” or 445mm

28” or 711mm

31.5” or 800mm

53-1/4 or 1352mm

Blade holder original

Cutter strip length

Blades 45 degrees package of 1 or 3 blades

Blades 60 degrees package of 1 or 3 blades

Special Blade holder with 4 nooses

Engraving kit

Pouncing kit

Pouncing strip replacement for 12”, 15”, 24”, 30”

Pouncing strip replacement 48”

Vinyl Cutter Accessories

Thank you for choosing our vinyl cutter:

Before using your vinyl cutter, we propose to you that you read this manual

and to view the DVD supplied with your cutter. We will show you how to use

your cutter and how to maintain your cutter in good running condition. When

you have trouble in using cutting plotter, please turn off the machine's power,

then look for the solution in this manual. If you contact the machine dealer he

will help you to resolve problems. A free assistance on the Web site

www.signmax.us (forum) or by email signmax@signmax.us is available.

Which is your model?

360C cutting plotter (12")

450C cutting plotter (15”)

720C cutting plotter (24") c/w stand

800C cutting plotter (30") c/w stand

1120C cutting plotter (42") c/w stand

1360C cutting plotter (48") c/w stand

Remarks of the manufacturer:

If your cutter becomes defective either needs maintenance or parts your

dealer will help you to find the suited solution . But we have no responsibility

to pay for the damage.

Vinyl Cutter User Manual V5.0

Entreprises Sign Max Inc.

Tel.: 514-644-3177 Fax: 514-644-3173

www.signmax.us

signmax@signmax.us

Place order from:

Summary of content (10 pages)

PAGE 1
Vinyl Cutter Accessories Blades 45 degrees package of 1 or 5 blades Blades 60 degrees package of 1 or 5 blades Blade holder original Cutter strip length Cutter strip Model 360C (12”) Cutter strip Model 450C (15”) Cutter strip Model 720C (24”) Cutter strip Model 800C (30”) Cutter strip Model 1360C (48”) 14-1/4” or 360mm 17-1/2” or 445mm 28” or 711mm 31.5” or 800mm 53-1/4 or 1352mm Vinyl Cutter User Manual V5.
PAGE 2
Vinyl Cutter User Manual V5.0 Base assembly ... If you use vinyl roll, please before to cut unwind in advance the quantity of material necessary for the cutting. Place the pinch rolls about 1 inch inside on each side of vinyl, also lower the intermediate pinch rolls. To verify manually your vinyl alignment, place the cutter "OFF Line" (Red Led) and use the top and bottom arrows to feed in and out vinyl from the cutter.
PAGE 3
Vinyl Cutter User Manual V5.0 Base assembly ...
PAGE 4
Vinyl Cutter User Manual V5.0 Notice Vinyl Cutter User Manual V5.0 Equipment Limited Warranty (5) Don't remove or plug any wire when cutting plotter or computer is power on. Return Warranty Registration Form to activate your warranty. The following is a general warranty statement for all equipment. To receive the complete warranty statement specific for your product, please register your product online and we will forward you the product specific warranty.
PAGE 5
Vinyl Cutter User Manual V5.0 Vinyl Cutter User Manual V5.0 Plotting pen: Lock nut Pen holder shell Pen tip You can use standard ball pen refill as plotting pen; keep the ball pen tip out of the holder between 4mm and 5mm. Using method is similar as blade's process; please try it yourself according to the blade's changing method. Set the knife holder or pen holder on holder's seat: Turn off the plotter power. Set the holder on holder's seat, turn the screw of seat of holder.
PAGE 6
Vinyl Cutter User Manual V5.0 Vinyl Cutter User Manual V5.0 Cutting Blade and Plotting Pen Main parts descriptions Cutting Blade Holder: Front side / Left and Right sides 1 2 3 4 Lock Screw Blade Holder Shell Adjustable nose. Blade tip. (Blade extension) The distance between the blade end and the media is maximum 1/8” or 3mm. Adjust the blade holder in the cutter carriage to obtain a the right clearance and tighten the tool securing screw until the blade holder is secured in place.
PAGE 7
Vinyl Cutter User Manual V5.0 Reset the plotter: When the cutter works badly or if you wish to stop quickly the cutter, press only once the “Reset” key. All data in the cutter memory will be erased and the carriage will return to the right side near the cutter wall. Summary of the operation in “ON Line” mode 1) Press the button “ON Line” to see the button light green. 2) You can send data to the cutter 3) You can change speed using 4) You can change pressure Vinyl Cutter User Manual V5.
PAGE 8
Vinyl Cutter User Manual V5.0 Vinyl Cutter User Manual V5.0 Keyboard panel operating detail Second method: USB connection A) Install the WinPCSIGN software B) Install the RocKey2 key on a free USB port. C) Use the USB cable supplied with your cutter, connect one end to the computer USB port and the other end to the cutter USB port. Turn the cutter power ON. The USB driver is already installed Windows detects a new peripheral and complete the installation of the USB driver.
PAGE 9
Vinyl Cutter User Manual V5.0 Vinyl Cutter User Manual V5.0 WinPCSIGN Cutter configuration To test the equipment: Draw a square or a rectangle on the working page. Run the WinPCSIGN software and from the Settings menu, click on Plotter Codes Click on the Cutting icon, this will open the Cutting Control Panel Press the Start button. 8 Origin Point (0,0) Then from the setup plotter window click on Add/Remove.
PAGE 10
Vinyl Cutter User Manual V5.0 Vinyl Cutter User Manual V5.0 USB cable connection. WinPCSIGN Cutter configuration Serial cable connection. Your cutter model If you use a serial cable between cutter and computer, use the Com port available, normally is Com1 or Com2. (9 Pin Male on your computer) Cutter serial port (9 Pin female) Your Cutter If your cutter is configured to USB, Insert the Mini CDRom and click Select USB Plotter button to select the proper USB cutter driver installed.