User Manual

Shoulder Pad and Screws
ultraCage
Handlebar Clamp
microMount
with spud
microBalance Plus
8” and 4”
Handlebar Rods
2x 18” Carbon
Fiber Rods
Hand Grips
counter balance weights
microFollowFocus | blue
Top Handle and Thumbscrew
2x 6” Carbon
Fiber Rods
Shoulder Pad
Rod Clamp
http://start.redrockmicro.com
Tutorials, forums, customer support
ultra Field Cinema BASIC Bundle Components
ultra Field Cinema Bundle DSLR SETUP GUIDE
REDROCK MICRO
Title:
Scene:
Company:
Pages:
of
Date:
1
04.01.12
1
create the cinema experience
ultra Field Cinema Additional Options
A: Attach Shoulder Pad to Rod Clamp using provided screws.
B: Insert both 18” Rods into Rod Clamp, then into ultraCage.
C: Remove blue knob from Handlebar Clamp. Attach 4” and 8” rods to
Handlebar Clamp as shown. Replace blue knob.
B
C
D: Add microBalance Plus to rig.
E: Add assembled Handlebar to rig.
F: Add blue Handgrips and microMount to Handlebar rods.
G: Add external monitor (not included) to microMount.
D
F
E
J
I
H
H: Attach Add-On Weights to microBalance Plus.
I: Attach Top Handle (see above note) and 6” Carbon Fiber Rods to top of ultraCage.
J: Attach microFollowFocus | blue to rig and microLens Gear to camera lens.
ultra Field Cinema BASIC and DELUXE Bundles
ADDITIONAL OPTIONS
Note: when using Top Handle,
Triangle Thumb screw replaces
1/4-20 x 3/8” screw at top of
cage into camera.
COMPLETE BASIC ultra Field Cinema ASSEMBLY
G
A
1
2

Summary of content (1 pages)