Specifications
Water Boiling Systems
SB Professional Beverage Water Boiler SB Professional Beverage Water Boiler
Key Features:
• Stainless steel water tank with fully insulated jacket to
minimise heat loss
•
R
obust corrosion resistant construction
• Brushed stainless steel cover wipes clean
• Neon ‘power on’ light
•
W
ater temperatur
e is automatically maintained
• Unit is fitted with manual reset safety device to avoid
boiling dry
•
Manual r
eset thermostat for detecting excessive
steam in the event of water solenoid valve failur
e
• Condensation chamber for steam-free operation
• Open vent and overflow
• Provides for concealed plumbing and electrical
connection
•
Operating pr
essur
e range between 2bar (29psi) and
10bar (140psi)
• Connects to 13 Amp (220-240V) double-pole fused
isolating switch
• 2 year guarantee (UK)
•
BEAB, WRAS and CE appr
oved
Product Catalogue *Storage *First Hour Initial Initial Recovery Electrical Approximate Approximate
R
eference
Number Capacity Delivery Draw Off Draw Off Rate Heating Weight Kg Laden
(Litres) (Cups) (170ml) (Litres) (Cups/hr) Element (kW) Weight Kg
SB Pr
ofessional 2.5L
22-7138-01
*
2.5
*
125 15 2.5 125 2.4 6 8.5
SB Professional 5L 22-7158-01 *5.0 *135 30 5.0 125 2.4 7 12
SB Pr
ofessional 7.5L 22-7168-01 *7.5 *150 45 7.5 125 2.4 8 15.5
SB Professional 10L 22-7178-01 *10.0 *175 60 10.0 125 2.4 9 19
SB Pr
ofessional 15L
22-7188-01
*
15.0
*
200
100
15.0 125 2.4 10 25
SB Professional 20L 22-7193-01 *20.0 *225 120 20.0 125 2.4 12 32
SB Professional 25L 22-7197-01 *25.0 *250 150 25.0 125 2.4 13 38
Specification
SB Professional
A wall-mounted, self-calibrating and
self-filling boiling water heater for
Industrial and Commercial applications.
It can be used for making cups of tea or
coffee and even soups and hot snacks.
Available in 7 capacity sizes, the 2.5 litre
model is ideal for small offices, ranging
to the 25 litre model suitable for a busy
canteen, community hall or hospital,
dispensing up to 150 cups of boiling
water on demand and a delivery of 250
cups per hour.
40 41
Installation:
• Electrical connection via 1 metre cable supplied to
fused spur
• Water entry bottom/rear via standard 15mm
compression fitting
• Open vent and overflow
• Install over sink, draining board, or drip tray
Dimensions SB Professional 2.5L
4
A Height 430mm
4
B Width 315mm
4
C Depth 210mm
4
D Depth 125mm
4
E T
ap Height 185mm
Dimensions SB Professional 5L
4
A Height 510mm
4
B Width 370mm
4
C Depth 250mm
4
D Depth 170mm
4
E Tap Height 185mm
Dimensions SB Professional 7.5L
4
A Height 510mm
4
B Width 370mm
4
C Depth 250mm
4
D Depth 170mm
4
E Tap Height 185mm
Dimensions SB P
rofessional 10L
4
A Height 565mm
4
B Width 425mm
4
C Depth 320mm
4
D Depth 240mm
4
E T
ap Height 185mm
Dimensions SB Professional 15L
4
A Height 565mm
4
B Width 425mm
4
C Depth 320mm
4
D Depth 240mm
4
E Tap Height 185mm
Dimensions SB Professional 20L
4
A Height 630mm
4
B Width 490mm
4
C Depth 350mm
4
D Depth 270mm
4
E Tap Height 185mm
Dimensions SB Professional 25L
4
A Height 630mm
4
B Width 490mm
4
C Depth 350mm
4
D Depth 270mm
4
E Tap Height 185mm
Typical Specification: SB Professional
Supply and install a new Redring SB Professional wall
mounted water boiler as supplied by
Applied Energy Products Ltd.,
Morley Way Peterborough PE2 9JJ.
Sales Hotline: 08709 000420.
Model: Cat No:
2.5L 22-7138-01
5L 22-7158-01
7.5L 22-7168-01
10L 22-7178-01
15L 22-7188-01
20L 22-7193-01
25L 22-7197-01
• The water boiler shall have a capacity ranging from
2.5 litr
es to 25 litres and 2.4kW element rating
• The water boiler shall incorporate bottom entry for
water, vent and 240 volt single phase electrical supply
• The water boiler shall be surface mounted 15mm
water supply to the unit and a 15mm vent which shall
drop to discharge to a suitable waste
• The water boiler shall be installed using an isolating
valve, and double check valve prior to the inlet of the
unit and in an accessible position
• The water boiler should be approved by BEAB for
electrical safety, WRAS for connection to mains water
systems and CE compliant to the low voltage directive
and electro magnetic compatibility directive
• The water boiler shall have a 2 year manufacturer’s
guarantee for UK use
*To help you select the right size water boiler,
select the number of cups you will require in the
first hour of use from the specification chart below,
this will give you the appr
opriate capacity
.