Specifications

Product Short Catalogue Capacity Capacity Weight Weight
Reference Code Number Litres (Hot) Litres (Cold) Empty (Kg) Full (Kg)
Cistern Type 25 CT25 26-785001 25 8 20 53
Cistern Type 50 CT50 26-785101 50 24 32 106
Cistern T
ype 75
CT75
26-785201
75
24 37 136
Cistern Type 100 CT100 26-785301 100 24 40 164
• Copper sheet water vessel with brazed seams • Corrosion proofed steel, with enamel finish outer casing
• 3kW Incoloy sheathed element • 1/2" BSP cold water and 22mm compression fitting hot water connections.
Specification
BC
Dimensions Flatback Cistern Type
CT2
5
4
A Height 705mm
4
B Width 470mm
4
C Depth 210mm
CT5
0
4
A Height 750mm
4
B Width 600mm
4
C Depth 320mm
CT75
4
A Height 925mm
4
B Width 600mm
4
C Depth 320mm
CT100
4
A Height 1080mm
4
B Width 600mm
4
C Depth 320mm
T
ypical Specification: Flatback Cistern Type
Supply and install a Redring Flatback Cistern Type
large vented water storage heater for wall mounting as
supplied by
Applied Energy Products Ltd.,
Morley Way Peterborough PE2 9JJ.
Sales Hotline: [phone].
Model: Cat No:
25 Litre Capacity 26-785001
50 Litre Capacity 26-785101
75 Litre Capacity 26-785201
100 Litre Capacity 26-785301
• The heater shall be designed to allow hot water supply
to multiple outlets
• The heater shall be constructed to provide temperature
control between 50-80°C
• Precision temperature control shall be provided by 2
adjustable thermostats
• Water heating shall be provided by means of a 3kW
incoloy sheathed heating element and contain an
overheat protection device
• The heater water vessel shall be manufactured from
copper sheet joined with brazed seams and be housed in
a corr
osion pr
oofed, enamel finished, steel outer case
• The water heater shall be approved by BEAB for
electrical safety, WRAS for connection to mains water
systems and CE compliant to the low voltage directive
and electro magnetic compatibility directive
• The water heater shall have a 1 year manufacturer’s
guarantee for UK use
8.5
kW
7.2
kW
These Flatback Cisterns are designed
for wall mounted installation. A compact
unit which provides a multi-outlet water
heating solution.
Large Vented Storage Water Heaters Flatback Cistern Type
Key Features:
• 7 litre capacity, point of use
• Adjustable thermostat 15°C - 75°C with frost
pr
otection setting
•
Choice of 1kW and 3kW models
•
300mm swivel spout included
•
Extended outlets available
•
W
all bracket and full fixing pack supplied
• Integral safety over temperature thermal fuse
• 3 year guarantee (UK)
• BEAB, WRAS and CE approved
Accessories:
• Extended length swivel spout (450mm)
• Extended length swivel spout (600mm)
•
Monoblock chr
ome mixer (for undersink installation)
Product
Shor
t
Catalogue
Inlet kW Loading Recommended
R
eference
Code
Number
Connection @ 240V Cable Size FuseRating
WS7 WS73 44-780001 15mm (1/2") 3kW 2.5mm
2
13 amps
WS7 WS71 44-780002 15mm (1/2") 1kW 1.0mm
2
5 amps
Extended swivel (450mm) 84-780404 - - - spout
Extended swivel (600mm) 84-780405 - - - spout
Monoblock chrome mixer 84-780408 - - -
• Corrosion resistant polypropylene water container with polystyrene insulation • High quality impact resistant ABS cover
• Capillary type, externally adjustable thermostat
Specification
Dimensions WS7
WS7 Small Vented Storage Water Heaters
WS7
The WS7 offers an economical solution
to provide stored hot water at point of
use and can be mounted undersink using
the special monoblock chrome-mixer
accessory. These units also benefit from
minimal standing heat loss because they
are installed at point of use.
Flatback Cistern Type
2928
Typical Specification: WS7
Supply and install a Redring WS7 small vented water
storage heater for over sink operation, as supplied by
Applied Energy Products Ltd.,
Morley Way Peterborough PE2 9JJ.
Sales Hotline: [phone].
Model: Cat No:
3kW 44-780001
1kW 44-780002
• The water heater shall be designed to provide 7 litres
of stored hot water capable of temperature adjustment
between 15-75°C
• The temperature control shall incorporate a frost
protection setting
• The water heater shall be designed to deliver hot water
through a 300mm swivel spout as supplied. On/off flow
control is via a tap supplied with the heater
• The water heater shall be supplied with a wall bracket
and full fixing pack
• The water heater shall be capable of 15mm water
connection via side or bottom entry and electrical
connection via r
ear or bottom entry
• The water heater shall be approved by BEAB for
electrical safety, WRAS for connection to mains water
systems and CE compliant to the low voltage directive
and electr
o magnetic compatibility dir
ective
• The water heater shall have a 3 year manufacturer’s
guarantee for UK use
Key Features:
• Choice of 25, 50, 75 or 100 litre capacities
• Two adjustable thermostats for precise control
• Overheat protection
• Ideal for replacement (overflow and cold feed can be
connected on the left or right hand side)
•
50 to 80
°
C thermostatic contr
ol range
•
Drain connection supplied and fitted
• 1 year guarantee (UK)
• BEAB, WRAS and CE approved
450mm
Extended Swivel Spouts
600mm
Monoblock
Chrome Mixer