Specifications

Product Short Catalogue kW Loading Recommended Recommended
R
eference
Code
Number
@ 240V
Cable Size
Fuse Rating
Contour 7000 3kW C73 44-784001 3kW 2.5mm
2
13 amps
Contour 7000 1kW C71 44-784002 1kW 1.0mm
2
5 amps
Contour 7000 Remote C7U3 44-784020 3kW 13 amps
Extended swivel spout - 450mm 84-780404 - - -
Extended swivel spout - 600mm
84-780405 - - -
Monoblock chrome mixer
84-780408
-- -
Extended flexible hose (2 metres) 83-762502 - - -
• Corrosion resistant polypropylene water container with polystyrene insulation • High gloss, high strength impact resistant ABS cover • Capillary type, externally adjustable thermostat
• Restrictors supplied to optimise flow rate • Integral safety over temperature ther
mal fuse
Specification
Contour 7000 Small Vented Storage Water Heaters Large Unvented Storage Water Heaters LWC Range
Key Features:
• 7 litre capacity, point of use
• Adjustable thermostat 15
°C - 75°C
• Integral on/off and flow control
•
Frost protection setting
•
Choice of heat settings
• Ideal handwash and dishwash temperature settings
indicated on the unit
• Tamperproof thermostat cover
• Complete with 300mm swivel spout
• Proven long life copper element
•
Negligible standing heat loss
•
3 year guarantee (UK)
• BEAB, WRAS and CE approved
Features exclusive to the
Contour 7000 Remote.
• On/off control via touch air switch
•
Hot water deliver
ed thr
ough a remote swivel spout
• Remote air switch swivel spout and flexible
hose supplied
• Neat out of sight installation
Contour 7000
The Contour 7000 has a 7 litre capacity
of hot water storage for oversink
washing needs. Using the monoblock
chrome accessory it can be fitted
undersink. Alternatively the
Contour
7000 Remote is a complete installation
pack for undersink fitting, featuring an air
operated sink mounted switch that when
pressed delivers hot water through a
remote swivel spout at your pre-set
temperature. These units also benefit
from minimal standing heat loss because
they are installed at point of use.
26 27
Dimensions Contour 7000
Accessories:
• Extended swivel spout (450mm)
• Extended swivel spout (600mm)
• Monoblock chrome mixer (for undersink installation)
•
Standar
d 15mm (1/2”) inlet connection
• Rear or bottom cable entry
• Side or bottom water entry
• Wall bracket and full fixing pack supplied
Typical Specification: Contour 7000
Supply and install a Redring Contour 7000 small vented
water storage heater for over sink operation, as supplied by
Applied Energy Products Ltd.,
Morley Way Peterborough PE2 9JJ.
Sales Hotline: [phone].
Model: Cat No:
3kW 44-784001
1kW 44-784002
• The water heater shall be designed to provide 7 litres
of stored hot water capable of temperature adjustment
between 15-75°C
• The temperature control shall be located behind a
tamper-proof cover on the control panel. This control
shall incorporate a frost protection setting
• The water heater shall be designed to deliver the hot
water through a 300mm swivel spout as supplied and
controlled by means of an integral on/off flow control
located visibly on the control panel
• The water heater shall be supplied with a wall bracket
and full fixing pack
• The heater shall be capable of 15mm water connection
via side or bottom entry and electrical connection via
rear or bottom entry
• The water heater shall be approved by BEAB for
electrical safety, WRAS for connection to mains water
systems and CE compliant to the low voltage directive
and electro magnetic compatibility directive
• The water heater shall have a 3 year manufacturer’s
guarantee for UK use
Contour 7000 Remote
4
Undersink Mounting
Installation Contour 7000 Remote
Air Switch and Swivel Spout
4
Air switch and swivel spout are included in installation pack.
Contour 7000 Remote
Supply and install a Redring Contour 7000 Remote
small vented water storage heater for under sink
operation, as supplied by
Applied Energy Products Ltd.,
Morley Way Peterborough PE2 9JJ.
Sales Hotline: [phone].
Model: Cat No:
3kW 44-784020
• The water heater shall be designed to provide 7 litres
of stored hot water capable of temperature adjustment
between 15-75°C
• The temperature control shall be located behind a
tamper-proof cover on the control panel. This control
shall incorporate a frost protection setting
• The water heater shall be designed to deliver hot water
through a flexible hose coupling connected to a
remote swivel spout and operated via a remote air
switch which are both to be supplied with the unit
•
The water heater shall be supplied with a wall bracket
and full fixing pack
• The heater shall be capable of 15mm water connection
via side or bottom entry and electrical connection via
rear or bottom entry
• The water heater shall be approved by BEAB for
electrical safety, WRAS for connection to mains water
systems and CE compliant to the low voltage directive
and electro magnetic compatibility directive
• The water heater shall have a 3 year manufacturer’s
guarantee for UK use
Installation of Contour 7000
4
Oversink Mounting
Installation of Contour 7000 Remote
4
Undersink Mounting requires the monoblock mixer
accessory for undersink mounting
450mm
Extended Swivel Spouts
600mm
Monoblock
Chrome Mixer