Operating instructions

8
Operating Instructions
General Product Description
The SB² is a wall mounted, self-calibrating and self-filling boiling water heater.
It can be used for making cups of tea or coffee and even soups and hot snacks.
A special condenser traps steam and returns droplets to the tank, minimising waste and saving
energy.
The water temperature is set and automatically maintained by the SB² and the unit is powered down
with the “Power” button. Water is dispensed by rotating the front cover knob clockwise.
How to operate the SB² (see Fig.6)
Make sure the electricity and water are turned on.
Use the “POWER” button to switch on the SB² on and to power down.
The SB² should be switched off at the mains if the water is not required e.g. at weekends,
holidays etc.
POWER light: when the SB² is on the POWER light will come on.
FULL light: Full light comes on when the tank is full of water.
The SB² fills up automatically and this can take up to 10 minutes if the tank is
completely empty.
TEMPERATURE TEMPERATURE READY light comes on when the water is hot enough to use.
READY light: This can happen even when the tank is not completely full of water.