Operating instructions

3
Important Notes
This appliance is intended to be used in household and similar
applications such as:-
- staff kitchen areas in shops, offices and other working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
All installations must be undertaken by a competent installer.
If in any doubt, advice and assistance should be sought from a qualified
plumber and/or electrician.
Installation and wiring must conform to the current BS.7671 (IEE Wiring
Regulations) and the Water Fitting Regulations.
Local regulations may apply in other countries.
The steam vent connection MUST BE MADE, (see page 4)
A means for disconnection in all poles must be incorporated in the fixed
wiring in accordance with the wiring rules.
Check that the mains supply matches the electrical rating on the product.
The rating plate is located on the bottom edge of the unit.
Frost Protection: This appliance should be located where the ambient air
temperature is between 5°C and 50°C.
If the temperature may fall below 5°C when the appliance is not in use, do
not turn off the appliance electrically. This safeguard does NOT offer
protection to the connecting pipe work and fittings.
The unit should not be operated if freezing is suspected.
Allow the unit to thaw completely.
This unit must not be cleaned by, or installed in an area cleaned by
a water jet.
THIS APPLIANCE, AND ALL METAL PIPEWORK CONNECTED TO IT,
MUST BE EARTHED.
If you have any queries about installing this product or after it has been
installed, please contact our Customer Service Helpline on 0844 372 7766
or alternatively email us on [e-mail]
Customers outside the U.K. should contact their local distributor.
This product may need to be descaled regularly.
The frequency of descaling will depend on the water supply hardness.