User's Manual

SIM™ User Manual | Ref Code: SUM | GEN4_0024| Version: 8
21
Ion battery and an electronic circuit board containing Wi-Fi radio
module, micro-controller, and memory and charging circuitry. SIM™
pod is equipped with a safety circuit that limits the electrical energy
available when a SIM™ sensor is connected.
SIM™ pods must be configured to use the facility’s Wi-Fi network prior
to use; configuration can be done using a client PC connected to the
server and the SIM™ pod via a USB cable and is only required once,
unless Wi-Fi network changes are made.
SIM™ dock
Recharging station for the SIM™ pod. The SIM™ dock includes a low
voltage supply connected to mains electricity.
The SIM™ dock provides an electrical and mechanical means to
connect a 5V power supply and a USB cable (for configuration). The
dock does not contain any additional electronics.
Note:
Only the low voltage power supplies specified in this User
Manual are approved for use with SIM™.
Care staff, facility IT
staff (during setup)
SIM™ assist
A software application (app) operating on an Android phone or tablet
used for recording resident observations, such as successful toileting or
fluid intake; also used to provide SIM™ assessment messages to users.
Recorded observations are uploaded via Wi-Fi to the server side SIM™
software.
The SIM™ assist app is currently supported for Android OS3.2
(Honeycomb) or later.
Care staff