User's Manual

SIM™ User Manual | Ref Code: SUM | GEN4_0024| Version: 8
144
12. Follow the instructions provided and click on “Detect pods”. Depending on DNS settings this may
require a second attempt to detect pods successfully. If USB connected pods do not appear in the list,
refer to the troubleshooting section for further help.
13. When configuring SIM™ pods for the first time, you will need to attach SIM™ pod numbered
identifying labels to the individual pods and assign them a number in the configuration screen. Please
refer to the diagrams below and the instructions in the SIM™ configuration tool.
a. Identify the MAC address on the SIM™ pod.
b. Match the SIM™ pod’s MAC address to the MAC address to the list of detected devices.
c. Note the SIM™ pod’s number, e.g. “Pod6”. This is pod number 6.
d. Affix the SIM™ pod’s number label to the back of the pod as shown below.
e. Click “Configure” to upload configuration information to the SIM™ pods. Note: when multiple
SIM™ pods are detected by the system, all pods will be configured with the same configuration
information.