Manualshelf

Reference Manual

ManualsBrandsRedpine Signals ManualsElectronicsDual Band 802.11 a/b/g/n, Bluetooth 5.0, ZigBee Module
919293949596979899100
Redpine Signals, Inc. Proprietary and Confidential Page 99
RS9116 n-Link Linux and Android
Technical Reference Manual
Version 2.0
18.3 Suspend system
Use below command to suspend the system.
This step will suspend the system and system goes to power save mode.
18.4 Trigger wakeup
To initiate trigger packet, connect a PC or laptop to AP through LAN/WLAN. Get IP and check ping to AP is working or not.
Copy WOWLAN applications 'wakeonlan' or 'etherwake' to this third party PC. Issue below command to issue trigger.
1. wakeonlan <MAC_addr_of_our_device>
Or
2. etherwake <MAC_addr_or_our_device>
For eatherwake application, please edit ether-wake.c and go to main() function, update the ifname with the interface
name of our device. Compile the application using below command.
3. gcc ether-wake.c –o etherwake
Upon issuing this trigger, system should resume in 2 to 5 seconds.