Reference Manual

Redpine Signals, Inc. Proprietary and Confidential Page 81
RS9116 n-Link Linux and Android
Technical Reference Manual
Version 2.0
started first in the user configured channel and client mode is started later, then AP switches to the channel in which
client is finally connected. However AP and client can operate in different security modes.
• If station disconnects then the AP mode would also not be operational [i.e the AP stops beaconing and disconnects all
of the connected stations.
• Background scan(Bg-scan) and powersave features are not supported for the station mode vap in concurrent mode.
• In NL80211 mode, STA VAP has to be settled first (i.e. should be connected) to use proper country code. Whatever
country of STA VAP's AP (third party AP to which STA is connected), that will be advertised in Beacons of AP VAPs. If
AP VAPs were created first then also whatever country will be of 3rd party connected AP, that will be updated in our
AP VAP's beacon.
• In NL80211 mode, If Multiple AP VAPs only created then all VAP should have same country code. In this case
whichever AP will start first with country code, same will be use for others also.