Manualshelf

Reference Manual

ManualsBrandsRedpine Signals ManualsElectronicsDual Band 802.11 a/b/g/n, Bluetooth 5.0, ZigBee Module
51525354555657585960
Redpine Signals, Inc. Proprietary and Confidential Page 56
RS9116 n-Link Linux and Android
Technical Reference Manual
Version 2.0
Create a VAP The
OneBox-Mobile
software allows
creation of 4 VAPs
iwconfig command.
Default Value
-
Input Parameters
-
Output Parameter
None
Reset Required
No
Usage
# ./onebox_util <base_interface> get_txpwr
Example
./onebox_util rpine0 get_txpwr
Useonly rates
Description
This command is used set the supported rates in AP mode. This will be helpfull to control the
transmit data rates of the clients connected.
Default Value
All rates supported as per regulatory domain.
Input Prameters
Integer value as per the mapping below:
1 Mbps – 2
2 Mbps – 4
5.5 Mbps – 11
11 Mbps – 22
6 Mbps – 12
12 Mbps – 24
Output Parameters
None
Reset Required
No
Usage
# ./onebox_util <base_interface> useonly_rates <rate_val> <rate_val> <rate_val>
Example
./onebox_util rpine0 useonly_rates 2 11 12
Table 5: Usage of onebox util
5.5.1 WPS Configuration
Wi-Fi Protected Setup (WPS) is a standard for easy and secure wireless network setup and connections. The Onebox-
Mobile supports the following configuration methods:
• Push Button Method
• PIN Method – Enter and Generate
A WPS Configuration file is used for setting up a connection with a remote Access Point or Station. A sample WPS
configuration file is given below for reference.