Reference Manual

Redpine Signals, Inc. Proprietary and Confidential Page 17
RS9116 n-Link Linux and Android
Technical Reference Manual
Version 2.0
For example, if the target platform is ARM and tool chain path is "/opt/freescale/usr/local/gcc-4.4.4-glibc-2.11.1-
multilib-1.0/arm-fsl-linux-gnueabi/bin/arm-none-linux-gnueabi-", then the command is issued as:
make ARCH=arm CROSS_COMPILE=/opt/freescale/usr/local/gcc-4.4.4-glibc-2.11.1-multilib-1.0/arm-fsl-linux-
gnueabi/bin/arm-none-linux-gnueabi-
Before installing the Onebox RS9116 Driver modules, make sure that the RSI opensource modules are uninstalled.
This has been taken care in the onebox_insert.sh script.
In order to un-install the RSI opensource driver, use the following commands:
# rmmod rsi_usb
# rmmod rsi_sdo
# rmmod rsi_91x