Reference Manual

Redpine Signals, Inc. Proprietary and Confidential Page 15
RS9116 n-Link Linux and Android
Technical Reference Manual
Version 2.0
If NL80211 support is enabled in the driver, make sure that the following modules are loaded in the kernel before
running the driver in order to avoid module dependencies. This can be verified by using the commands.
# lsmod | grep cfg80211
# lsmod | grep bluetooth
If they are not installed, can be installed by using the commands below :
# modprobe cfg80211
# modprobe bluetooth
By default the configuration is enabled with Wi-Fi, Bluetooth and ZigBee. If the user wants to compile the driver for a
particular protocol, he can disable the unwanted protocols in Menuconfig utility. In case of coex mode, the Wi-Fi must
always be enabled in conjunction with BT / ZigBee protocols, even if Wi-Fi will not be used.
For example, if the user wants to compile the driver only for Bluetooth only, the Wi-Fi and Bluetooth mode must be
enabled. Refer to the following images of Menuconfig utility for more information:
Figure 4: Selection of WIFI
Only Mode
3. After selecting the configuration, exit the menuconfig and save the configuration. Please refer the given below image of
saving the configuration.