Reference Manual

Redpine Signals, Inc. Proprietary and Confidential Page 109
RS9116 n-Link Linux and Android
Technical Reference Manual
Version 2.0
scrambler_seed: Initial seed to be used for whitening. It should be set to ‘0’ in order to disable whitening.In order to
enable it he should give the scrambler seed value, which is used on the receive side.
no_of_packets: Number of packets to be transmitted. presently this option not valid.
payload_type: Type of payload to be transmitted. ‘0’ – Payload consists of all zeros
‘1’ – Payload consists of all 0xFF’s
‘2’ – Payload consists of all 0x55’s
‘3’ – Payload consists of all 0xF0’s
‘4’ – Payload consists of PN9 sequence.
tx_power: Transmit power value should be between 0 and 18
tx_mode: Burst mode - 0 Continuous mode - 1
hopping type : no hopping -0 fixed hopping - 1 random hopping - 2
ant_sel : onchip antenna - 2 u.f.l - 3
inter_pkt_gap : Number of slots to be skipped between two packets Each slot will be 625usec (At Always will happen at Tx
slot).
pll_mode : PLL_MODE0 – 0 PLL_MODE1 – 1 PLL_MODE2 – 2
rf_type : External RF – 0 Internal RF – 1
rf_chain: WLAN_HP_CHAIN 0
WLAN_LP_CHAIN 1
BT_HP_CHAIN 2
BT_LP_CHAIN 3
23.3.3 Appendix
Frequencies and channel Numbers used for Bluetooth Classic Mode:
Bad(GHz)
Bandwidth(MHz)
Channel Number
Centre Freq(MHz)
2.4
1
0
2402
2.4
1
1
2403
2.4
1
2
2404
2.4
1
3
2405
2.4
1
4
2406
2.4
1
5
2407
2.4
1
6
2408
2.4
1
7
2409
2.4
1
8
2410
2.4
1
9
2411
2.4
1
10
2412
2.4
1
11
2413
2.4
1
12
2414
2.4
1
13
2415
2.4
1
14
2416
2.4
1
15
2417
2.4
1
16
2418
2.4
1
17
2419
2.4
1
18
2420
2.4
1
19
2421
2.4
1
20
2422
2.4
1
21
2423