User's Manual
Table Of Contents
- VisioNize® pipette manager
- Table of contents
- 1 Operating instructions
- 2 Safety
- 3 Product description
- 4 Installation
- 5 Operation
- 6 User administration
- 7 Troubleshooting
- 8 Maintenance
- 9 Technical data
- 10 Transport, storage and disposal
- 1 Other applicable documents
- 2 Checking the delivery package
- 3 Product description
- 4 Installation
- 1 Regulatory information
- 2 EU compliance statement
- 3 FCC compliance statement
- 4 ISED Canada compliance statement
- 5 Radiofrequency radiation exposure Information
- 6 Technical data
18
Product description
VisioNize
®
pipette manager
English (EN)
Qualified
3.4.3 Symbols for alarms, warnings and information
3.5 Liquid types
3.5.1 Volatile liquids
Examples of volatile liquids:
•Ethanol
• Methanol
•Acetone
Parameters:
• Pre-wetting
3.5.2 Foaming liquids
Examples of foaming liquids:
• Protein solution
Symbol Description
Alarm
Warning
Information
The stored liquid types contain optimized parameters for the dispenser (e.g.,
aspiration and dispensing speed, number of pre-wetting cycles, adjusted volume
etc.). If no liquid type is selected, the parameters will be reset to the default
values.
Foam formation is avoided with all liquids.
The pipette tips are automatically pre-wetted for all volatile liquid types. The
pipette tips must remain in the liquid until the process is completed!