Redmi Buds 4 User Manual 21 PAP
Read this manual carefully before use, and retain it for future reference. Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
First-time Use 1. Open the lid and take out earbuds. 2. Remove the protective film. 3. Put both earbuds into the charging case. Close and then open the lid to start pairing. Wearing Gently place the earbud into your ear canal, then adjust it to a comfortable position. During calls, make sure to point the talk microphone towards your mouth for clearer calls. Note: The M-size ear tips are preinstalled.
Charging Charging the earbuds When the earbuds are placed in the charging case, they will automatically start charging. into the charging case. This will extend their service life and helps to avoid losing or misplacing them. Charging the charging case Use the Type-C charging cable to charge both the earbuds and the charging case. The charging case indicator remains white while charging, and turns off when fully charged.
Turning Off Make sure the charging case is not out of charging case and close the lid, they will automatically disconnect and start charging, and automatically turn off once fully charged. When turned on and out of the charging case, about 1 hour if remaining disconnected from the device without any operations (such as being worn on or put back into the case). Connection First time connection When using for the first time, put both earbuds into the charging case and close the lid.
Note: If the earbuds cannot be connected, close and open the lid and then repeat the above operation. Connecting to other devices Make sure the charging case is not out of case. Keep the lid open, and press and hold the charging case indicator starts blinking. Now you can search and connect with the earbuds on a new device. When the earbuds are connected, any previously paired device can select and reconnect with the earbuds from its paring records.
Disconnected When the earbuds are connected to a device, if the device's Bluetooth is disabled, the device is too far to be connected to, or both earbuds are in the charging case with the lid closed, the earbuds will disconnect from the device. 1. Place the earbuds into the charging case. 2. Methods ： Method 1: Close the charging case lid. Press 10 seconds until the charging case indicator stays on for about 3 seconds and then turns off. Method 2: Open the charging case lid.
Function Overview Note: Once the weather is cold outdoors and your hands become dry, the earbuds may not function when touching them.
How to Use the App The built-in function can be used with the app via Bluetooth. Scan the QR code below to download the app. Connecting with the app Quick connection 1. Download and open the app. 2. Place the earbuds into the charging case and close its lid. Ensure the phone is unlocked and its Bluetooth is enabled, and hold it close to the charging case. Open the charging case lid and follow the instructions on the phone to connect the earbuds.
Examples of frequently used functions Once connected with the app for phones, press and hold the multi-function touch area on either earbud (in the app, set the "press and hold" as waking up the voice assistant) to activate the AI voice assistant to assist you in completing tasks by voice. Set an alarm for 8:00 tomorrow morning. Pause . Please speak louder.
Specifications Name: Wireless Earphones Model: M2137E1 Frequency Band: 2402–2480 MHz Max RF Output Power: < 20 mW Storage Temperature: 0 °C to 45 °C Operating Temperature: 0 °C to 45 °C Earbuds Wireless Range: 10 m (in an obstacle-free environment) Input: 5 V = 100 mA Wireless Connectivity: Bluetooth ® 5.
Important Safety Information be removed or replaced. To avoid damage to can only be replaced by the authorized service providers and must be replaced with the same type. incorrect type may defeat a safeguard (such as catching fire, explosion and leakage of corrosive electrolyte). Do not dispose of used with local laws and regulations. modify the product, as this may cause fire or even completely damage the product.
To prevent possible hearing loss, do not use high volume for long periods of time. This product is not a toy and may contain small parts. Please keep them out of the reach of children. water or other liquids or mechanically crushing explosion. temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. pressure that may result in an explosion or the leakage of flammable liquid or gas.
EU DECLARATION OF CONFORMITY Hereby, Chongqing Qianxing Technology Co., Ltd. declares that the radio equipment type M2137E1 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: declaration.html Hereby, Chongqing Qianxing Technology Co., Ltd. declares that the radio equipment type M2137E1 is in compliance with Radio Equipment Regulations 2017.
WEEE Information All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities.
accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure co-located or operating in conjunction with • The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg aver aged over one gram of tissue.
Warranty Notice As a Xiaomi consumer, you benefit under certain conditions from additional warranties. Xiaomi offers specific consumer warranty benefits which are in addition to, and not instead of, any legal warranties provided by your national consumer law. The duration and conditions related to the legal warranties are provided by respective local laws.
Products which were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi’s official seller are not covered by the present warranties. As per applicable law you may benefit from warranties from the non-official retailer who sold the product. Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product.
Complies With IMDA Standards DB106135 CIDF15000056 80848/SDPPI/2022 9003 CS34564 Energy Efficiency Verified Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Chongqing Qianxing Technology Co., Ltd. (a Mi Ecosystem company) Address: No. 8, Shuangxing Avenue, Biquan Street, Bishan District, Chongqing Municipality, China For further information, please go to www.mi.com User Manual Version: V1.0 Importer: Beryko s.r.o. Pod Vinicemi 931/2, 301 00 Plzeň www.beryko.
