Quick Start Guide
Table Of Contents
- Your phone at a glance
- Inserting the SIM card
- Charging the battery
- Disposal of your old phone
- Declaration of RoHS 2.0 Compliance
- EU certified frequency band
- Hardware and software
- EU Declaration of Conformity (DoC)
- Safety warning
- Health and safety
- FCC Regulatory Compliance
- FCC Regulations:
- RF exposure information (SAR)
- Hardware and software
- FCC Caution.
- Legal notice
2
Inserting the SIM card
1. Insert the end of the eject tool into the hole of the card tray and press firmly until the
tray pops out.
2. Put one or two nano-SIM cards into the tray.
3. Push the card tray back into the phone.
Note
Dimensions of a nano-SIM card: 9 mm*12 mm.
Charging the battery
Connect the phone to the power outlet using the included USB cable and power adapter.
Note
Your phone and power adapter might heat up while charging.
Use other USB cable or power adapter might decrease the life span of your phone or
cause fire, explosion and other hazards.
Disposal of your old phone
When the wheelie bin symbol is attached to a product, it means the product is
covered by the European Directive 2012/19/EU.
All electrical and electronic products should be disposed of separately from normal
household waste via designated collection points provided by government or local
authorities.
The correct disposal of electrical and electronic products will help protect the
environment and human health.
Declaration of RoHS 2.0 Compliance
We’re determined to reduce the impact we have on the environment and take
responsibility for the earth we live on. So this document allows us to formally declare that
the NX659J, manufactured by Nubia Technology Co., Ltd., fully complies with the European
Parliament’s RoHS (Restriction of Hazardous Substances) 2.0 Directive 2011/65/EU, with
respect to all the following substances: