User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 99 of 152 March 2, 2011
Table 31: CLI - set (PMP-Specific Commands)
id - Group reference ID number.
grppri <id> <pri>
Group default priority.
id - Group reference ID number.
pri - Group 802.1p priority setting.
grpvid <id> <vid>
Group VLAN ID.
id - [id number]
vid - VLAN ID
grpviden <id> <off | on>
Group VLAN enable.
id - [id number]
off - Disabled
on -Enabled
idname <id> <name>
View or modify the name associated with an ID.
id - ID for Link, Connection, or Group.
name - Name (maximum 15 text characters).
maxdst <distance>
Maximum distance to a subscriber.
value - Distance (Km) to farthest subscriber.
regper <4 - 100>
The number of frames between registrations.
sstoss <id> <off | on>
Status of packet routing between SSs.
id - Link ID number.
off - Disable routing broadcast packets from SS to SS.
on - Enable routing broadcast packets from SS to SS.
sysmode <pmpsc | pmpss>
pmpsc - The sector controller (base station) begins transmitting automatically;
sending poll messages to locate the remote subscribers (pmpss).
pmpss - Subscribers wait passively, monitoring the selected channel(s) until
polled by the pmpsc (sector controller).
ulminrate <id> <6 - 54>
Link minimum downlink uncoded burst rate.
id = Link ID number.
ulpir <id> <50 - 50000>
Connection uplink peak information rate (PIR) (Kbps).
id - Connection ID number.
ulqos <id> <6 - 53>
Connection uplink QoS setting.
id - Connection ID number.
ulrate <id> <1-54>
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]