User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 91 of 152 March 2, 2011
Table 27: CLI - save
Idtable (PMP only).
idtable
Save current idtable settings (PMP only).
snmp
Save current SNMP settings.
6.1.16 Script
Use the script command to save a file containing a string of Commands that can be
used to restore the current (active) configuration of the AN-80i. Saved configuration files
can be viewed, copied, and/or modified using a text editor.
The file will be saved in the TFTP default directory. The filename may be any name and
extension valid for the TFTP server platform. It is recommended use a filename that
uniquely identifies the AN-80i unit and the current date (e.g., Red80-AD0023-
080723.cfg). See 'load' command.
Table 28: CLI - script
Create and save a script file containing all configuration settings.
script <server> <name>
server - TFTP server IP address
name - Script file name
Note: User account groups, usernames and passwords are not saved by the script
command. Accounts must be created manually by a user using Telnet or a Web
browser. The 'user' commands are interactive and can not be automated.
6.1.17 Set
Use the set command to view and/or change a parameter.
Table 29: CLI - set (Common for PTP and PMP)
View and change general parameter settings.
set <parameter>
activekey <1 | 2> <key>
Select the active options key (position 1 or 2). Advance notice is provided when a
temporary options key is about to expire. If the temporary options key is
selected as the active key, a message is logged and an SNMP trap is
generated every 6 hours during the last five days of operation.
key - Optionally enter a new key value.
adaptmod <off | on>
Enable or disable the adaptive modulation function.
off - Disable
on - Enable
antgain <gain>
Set the antenna gain (used for DFS).
<gain> Enter gain in dBm.
autoscan <off | on>
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]