User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 88 of 152 March 2, 2011
Table 20: CLI - get (PMP-Specific Commands)
lrcon: Number of
Link
registered
Connection
s.
lscode:
Link status code.
lulblk: Up
Link total blocks counter.
lulbr: Up
Link burst rate.
luldblk: Up
Link discarded blocks counter.
lullfr: Up
Link lost frames counter.
lulrblk: Up
Link retransmitted blocks counter.
lulrssi: Up
Link RSSI.
lulsnr: Up
Link SINADR.
luptime:
Link up-time.
regconn: Number of configured
Connections.
regstations: Number of configured stations.
sysstarttime: Time when the system started.
uldpkt: Up
Link discarded packets counter.
ulrpkt: Up
Link Rx packets counter.
ultpkt: Up
Link Tx packets counter.
werxpkt: Wireless Eth Rx packets counter.
werxpktdis: Wireless Eth Rx discarded packets counter.
werxpkterr: Wireless Eth Rx packets with errors counter.
wetxpkt: Wireless Eth Tx packets counter.
wetxpktdis: Wireless Eth Tx discarded packets counter.
wetxpkterr: Wireless Eth Tx packets with errors counter.
6.1.9 Load
Use the load command to load information to the AN-80i.
Table 21: CLI - load
Load stored information from non volatile ram or a remote server.
load <file> <idtable> <script>
file <server IP> <filename> <usr | factory | fips> <tftp | sftp> <user> <password>
Load a key or certificate file from FTP server. The file will be saved in flash RAM area. A
reboot
is required to activate changes to security data.
The filename must be one of the following:
dsa_key_<mac>.pem DSA key used for SSH.
rsa_key_<mac>.pem* RSA Key used for SSH.
ssl_cert_<mac>.pem SSL Certificate.
ssl_key_<mac>.pem SSL Key.
usr_wcert_<mac>.der** User wireless certificate.
usr_wkey_<mac>.der* User wireless key.
usr_wacert_<mac>.der* User wireless authority certificate.
The <mac> portion is the MAC address of the board.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]