User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 84 of 152 March 2, 2011
6.1.2 Chgver
Use the chgver command to change the software version loaded when the AN-80i is
rebooted.
Table 12: CLI - chgver
Use this command to switch to alternate software version.
chgver (no options)
Switch to the binary saved in the alternate version of software. This command works
silently (no operator confirmation) and the AN-80i reboots immediately.
Note: Use 'get swver' to list the active and alternate versions of software.
6.1.3 Clear
Use the clear command to delete all entries in a table.
Table 13: CLI - clear
Enter this command to delete all contents from a data structure.
clear <arptable> <freqlist> <idtable> <log>
arptable
Delete all static entries in the ARP table (refer to arp).
freqlist
Delete all frequency ranges from list (refer to 'freq' command).
idtable
Delete all IDs from the idtable (PMP only).
log
Delete all messages from the log.
6.1.4 Del
Use the del command to delete a specific ID or security key/certificate.
Table 14: CLI - del
Delete file information from the AN-80i non-volatile memory.
del <file> <folder> <id>
file <name> <mode>
Remove a file from flash and runtime memory.
name <filename>
File name on server. File name must be one of the following:
dsa_key_<mac>.pem DSA key used for SSH.
rsa_key_<mac>.pem RSA Key used for SSH.
ssl_cert_<mac>.pem SSL Certificate.
ssl_key_<mac>.pem SSL Key.
usr_wcert_<mac>.der* User wireless certificate.
usr_wkey_<mac>.der* User wireless key.
usr_wacert_<mac>.der* User wireless authority certificate.
The <mac> portion is the MAC address of the board. For example: dsa_key_00-
09-02-00-01-02.pem
RSA is not used for SSH
Connections in v4.00 and higher.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]