User manual
AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 83 of 152 March 2, 2011
Table 10: CLI - Root Mode Commands
PTP PMP Command Description
√ √
Tab
When entering a command, hit the Tab key at any time to perform
auto-complete or view available options.
√ √
?
Use the '?' character to display help for any command or mode.
Example
: From the root directory, enter the following command to
list all parameters that can be changed using the 'set' command:
set?
√ √
CTRL-Z
Return to root mode.
Cancel command entry (alternative to backspace delete).
√ √
exit
Return to parent node / mode.
all (exit all) Return to root mode.
√ √
logout
Terminate this telnet session. May be entered from any mode.
6.1 Command Set
6.1.1 Arp
Use the arp command to manually (e.g., for wireless link aggregation). A maximum of
two static (persistent) entries can be added to the table. Use the 'save config' command
to permanently save changes to the static entries in the ARP table. Static entries loaded
at boot time are recorded in the AN-80i system log.
Table 11: CLI - arp
arp <add> <del> <print>
add <Host> <MAC>
Add a new static entry in the AN-80i ARP table. Use 'save config' to save these
entries permanently. A maximum of two static entries can be added to the table.
Host Host IP address. Must be same subnet as AN-80i unit.
MAC Host MAC address (e.g., 01-02-03-04-05-06)
del <Host>
Delete a static or dynamic entry from the ARP table. Also see command 'clear
arptable'.
Host: Host IP address of ARP entry to be deleted
print
Print the ARP table. The * indicates manually entered values.
For example:
192.168.25.12# arp print
192.168.25.1 at 00:05:5d:e0:5b:10
192.168.25.22 at 11:22:33:44:55:66 *
192.168.25.33 at 01:02:03:04:05:06 *
192.168.25.201 at 00:05:5d:e0:5b:10
Persistent MACs:
192.168.25.22 at 11:22:33:44:55:66
192.168.25.33 at 01:02:03:04:05:06
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299