User manual

AN-80i User Manual
70-00072-01-10 Proprietary Redline Communications © 2011 Page 80 of 152 March 2, 2011
5.6 Upload Software Screen
Click Upload Software in the left hand menu to display the Upload Software screen.
This screen is used to upgrade the AN-80i with new software. The AN-80i contains non-
volatile storage for two versions of the software. The upload overwrites the non-
operational (unselected) version.
Fig. 50: Web - Upload Software Screen
Transfer Protocol: Select the type of server:
TFTP: Use Trivial File Transfer Protocol for file upload.
FTP: Use File Transfer Protocol for file upload.
Server IP Address: Enter the IP address of the computer with the software upgrade file.
The designated computer must be running a TFTP/FTP server.
Software File Name: Name of the software binary file (including file extension).
FTP User Name: Enter the user account name on the FTP server.
FTP Password: Enter the password for the user account name on the FTP server.
Upgrade Steps
A TFTP or FTP server must be installed and running on the computer being used to
upload the new software file. The AN-80i software binary file must
be located in the
default upload directory of the TFTP/FTP server.
Login to the AN-80i Web interface and perform the following steps:
1. Click on Upload Software in the main menu (left side of screen).
2. Select TFTP or FTP and enter the IP Address of the computer running the server.
3. Enter the full name of the binary file (including the .bin extension).
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]